metal integral cutting grinding wheel
High precision ultra-thin and ultra-hard material cutting grinding wheel is mainly used for cutting and grooving of various electronic components and precision parts in the field of electronic information. It has a series of advantages, such as high precision, small slit and good surface quality.
Integral cutting grinding wheel refers to the grinding wheel made of the same material as a whole. Thin thickness, high precision, mostly used for high precision, small depth of grooving and cutting. Binders mainly include metal (M) and resin (B).
Integral metal cutting wheel:
metal bond grinding wheel has good self-sharpening, sharp cutting, elastic bond, and can improve the quality of workpiece processing.
The types of metal integral cutting grinding wheel are mainly divided into 1A8/1 and 1A8/2. 1A8/1 refers to the integral cutting wheel without air groove, and A8/2 refers to its outer circle with water groove.
Ordering instructions:
When ordering for the first time, please provide the following parameters for us to help you select the most suitable cutting wheel.
Model: 1A8, 1A1, 1A1R, 3A1, 14A1, 1B1, 1E1, etc.
Specification and Size: Abrasive, Particle Size, Binder, Outer Diameter, Thickness, Inner Diameter, Abrasive Working Layer Width, Matrix Thickness, etc.
Usage: Workpiece name, cutting size, cutting material, grooving, cutting, etc.
Usage conditions: machine tool, grinding wheel speed, feed speed, cutting depth; dry cutting, wet cutting, etc.
Cutting requirements: cutting accuracy, collapse requirements, surface integrity, etc.
Special Requirements: Whether to use a combination of knives, whether resin cutting grinding wheel needs conductivity, whether to cut grinding wheel with water tank, size and quantity of water tank, type 1A1 cutting
Whether there are chip removal grooves on the outer side of the grinding wheel matrix, etc.
Attentions in the use of ____________
1. Before installing the cutting wheel, please check carefully. If there is any gap or other breakage, please stop using.
2. When the cutting wheel is marked with the direction of rotation, it should be consistent with the direction of rotation of the machine tool. On the contrary, the cutting is not sharp, and it is difficult to give full play to the performance of the cutting wheel.
3. Do not use cutting wheels that do not meet the requirements.
4. If abnormality is found in the cutting process, the machine should be stopped immediately and the causes should be checked.
5. When the cutting is not sharp, the grinding wheel should be trimmed and opened. If the grinding wheel continues to be used, it will be overheated and overloaded, which may cause damage to the grinding wheel.
6. In the process of grinding wheel turning, it is strictly forbidden to cut by hand, let alone touch sand by hand and body.
7. Cutting grinding wheels are strictly forbidden to be used in operations other than grooving or cutting to avoid abnormalities due to uneven forces.